| Manufacturer | John Deere |
|---|---|
| Type | Skid steer |
| Model | 125 |
| Lift Design | Vertical |
| Years Made | 1983 |
| Horsepower | 37.0 HP (27.6 kW) |
| Rating Operating Capacity (35% Tipping) | 950 lbs (431 kg) |
| Rating Operating Capacity (50% Tipping) | 1325 lbs (601 kg) |
| Operating Weight | 5420 lbs (2458 kg) |
| Tipping Load | 2650 lbs (1202 kg) |
| Maximum Travel Speed | 6.1 mph (96.8 km) |
| Pump Capacity | 15.0 GPM (56.8 LPM) |
| Relief Valve Pressure | 2000 psi (138 Bar) |
| Optional Pump Capacity | N/A |
| Hydraulic Tank Capacity | 18.0 gal (68.1 L) |
| Raise Lift Arms | 4.5 seconds |
| Lower Lift Arms | 2.4 seconds |
| Bucket Rollback | 2.2 seconds |
| Bucket Dump | 2.2 seconds |
| Engine Manufacturer | Continental |
| Engine Model | Y112 |
| Engine Type | Gasoline |
| No of Cylinders | 4 |
| Rated Speed | 2800 RPM |
| Torque Speed | 1500 RPM |
| Gross Power | 38.5 HP (28.7 kW) |
| Displacement | 112 cu. in. (1836 cc) |
| Bore | 3.2 in. (8.1 cm) |
| Stroke | 3.5 in. (8.9 cm) |
| Peak Torque | 90 ft-lb (122 N∙m) |
| Coolant Capacity | 3.0 gal (11.4 L) |
| Engine Oil Capacity | 1.0 gal (3.8 L) |
| Fuel Tank Capacity | 15.0 gal (56.8 L) |
| Cab Height | 82.3 in. (210.2 cm) |
| Bucket Hinge Pin Height | 108.3 in. (274.9 cm) |
| Width | 48.8 in. (121.1 cm) |
| Length with Bucket | 118.8 in. (301.6 cm) |
| Dump Height | 77.6 in. (197.1 cm) |
| Dump Reach | 19.5 in. (49.5 cm) |
| Ground Clearance | 7.0 in. (17.8 cm) |
| Dump Angle | 42° |
| Rollback Angle | 31° |
| Departure Angle | 22° |
| Front Tire | 8.50-15 |
| Rear Tire | 8.50-15 |
John Deere 125 Specs (Weight, Lift Capacity, Hp, Dimensions)
Compare with Another Model
1
2
3
Another Models
