
Compare with other models
SPECS / SKID STEERS
Bobcat 450 Specs
Bobcat 450 skid steer specifications: type Skid steer, lift design Radial, years made 1992-1999, horsepower 12.3 kW.
Manufacturer specifications
| Specification | Metric | Imperial |
|---|---|---|
| Type | Skid steer | |
| Lift Design | Radial | |
| Years Made | 1992-1999 | |
| Horsepower | 12.3 kW | 16.5 HP |
| Rating Operating Capacity (35% Tipping) | 190.5 kg | 420 lbs |
| Rating Operating Capacity (50% Tipping) | 272.2 kg | 600 lbs |
| Operating Weight | 995.6 kg | 2195 lbs |
| Tipping Load | 552.0 kg | 1217 lbs |
| Lift Breakout Force | 521.6 kg | 1150 lbs |
| Tilt Breakout Force | 476.3 kg | 1050 lbs |
| Maximum Travel Speed | 8.4 km | 5.2 mph |
| Pump Capacity | 25.7 LPM | 6.8 GPM |
| Relief Valve Pressure | 100.0 Bar | 1450 psi |
| Hydraulic Tank Capacity | 15.1 L | 4.0 gal |
| Raise Lift Arms | 5.0 seconds | |
| Lower Lift Arms | 4.0 seconds | |
| Bucket Rollback | 2.5 seconds | |
| Bucket Dump | 3.0 seconds | |
| Engine Manufacturer | Kohler | |
| Engine Model | M18QS | |
| Engine Type | Gasoline | |
| No of Cylinders | 2 | |
| Rated Speed | 3000 RPM | |
| Torque Speed | 2250 RPM | |
| Compression Ratio | 6.0:1 | |
| Gross Power | 13.0 kW | 17.5 HP |
| Displacement | 691 cc | 42.2 cu. in. |
| Bore | 7.9 cm | 3.1 in. |
| Stroke | 7.0 cm | 2.8 in. |
| Peak Torque | 40.0 N∙m | 29.5 ft-lb |
| Coolant Capacity | Air Cooled | |
| Engine Oil Capacity | 1.9 L | 0.5 gal |
| Fuel Tank Capacity | 24.5 L | 6.5 gal |
| Cab Height | 181.7 cm | 71.5 in. |
| Bucket Hinge Pin Height | 234.7 cm | 92.4 in. |
| Width | 90.0 cm | 35.4 in. |
| Dump Height | 180.8 cm | 71.2 in. |
| Dump Reach | 38.1 cm | 15.0 in. |
| Ground Clearance | 14.9 cm | 5.9 in. |
| Dump Angle | 38 ° | |
| Rollback Angle | 25 ° | |
| Departure Angle | 26 ° | |
| Front Tire | 5.70-12 | |
| Rear Tire | 5.70-12 |
Source: heavyequipments.net archive (imported 2026-10). Values may vary by variant and production year; seller claims are shown separately on the listing page.
