| Manufacturer | Liebherr |
|---|---|
| Model | L574 |
| Type | Wheel Loader |
| Horsepower | 265 hp (197,6 kW) |
| Weight | 53460 lbs (24249,0 kg) |
| Tipping Capacity | 40450 lbs (18347,8 kg) |
| Max Speed | 24.9 mph (40,1 km/h) |
| Engine Model | D 926 TI-E A2 |
| Engine Type | Water-cooled |
| No Of Cylinders | 6 |
| Aspiration | Turbocharged |
| Displacement | 607.8 cu in. (9960,1 cc) |
| Alternator Supplied Amperage | 55 amps |
| Operating Voltage | 24 V |
| Rated Speed | 2000 RPM |
| Torque Speed | 1200 RPM |
| Gross Power | 265 hp (197,6 kW) |
| Peak Torque | 947.8 lbs ft (1285,0 N-m) |
| Fuel Capacity | 87.2 gal (330,1 l) |
| Engine Oil Capacity | 6.3 gal (23,8 l) |
| Hydraulic System Capacity | 63.5 gal (240,4 l) |
| Differential Front Capacity | 13.5 gal (51,1 l) |
| Differential Rear Capacity | 13.5 gal (51,1 l) |
| Transmission Type | Stepless Hydrostatic travel drive |
| No of Forward Gears | 3 |
| No of Reverse Gears | 3 |
| Rear Axle Oscillation | 26° |
| Max Speed (Forward) | 24.9 mph (40,1 km/h) |
| Max Speed (Reverse) | 24.9 mph (40,1 km/h) |
| Pump type | Load-sensing, variable axial piston pump with output control and pressure cutoff |
| Pump Flow | 76.7 GPM (290,3 LPM) |
| Relief Pressure | 5076.4 psi (350,0 bar) |
| Raise Lift Arms | 5.6 sec |
| Lower Lift Time | 3.5 sec |
| Bucket Dump Time | 2 sec |
| Operating Weight | 53460 lbs (24249,0 kg) |
| Tipping Load | 40450 lbs (18347,8 kg) |
| Bucket Capacity (Heaped) | 5.9 cu yds (4,5 m³) |
| Bucket Width | 120 in (304,8 cm) |
| Breakout Force | 39340 lbs (17844,3 kg) |
| Reach At Max Lift And Dump | 48 in (121,9 cm) |
| Dump Clearance At Max Raise | 132 in (335,3 cm) |
| Turning Radius | 276 in (701,0 cm) |
| Wheelbase | 132 in (335,3 cm) |
| Bucket Hinge Pin | 180 in (457,2 cm) |
| Cab Height | 144 in (365,8 cm) |
| Overall Length | 348 in (883,9 cm) |
| Ground Clearance | 24 in (61,0 cm) |
| Tire Size | 26.5 R 25 |
Liebherr L574 Specs (Weight, Lift Capacity, Hp, Dimensions)
Compare with Another Model
1
2
3
Another Models
