| Manufacturer | John Deere |
|---|---|
| Type | Skid steer |
| Model | 8875 |
| Lift Design | Vertical |
| Years Made | 1994-1998 |
| Horsepower | 64.4 HP (48.0 kW) |
| Rating Operating Capacity (35% Tipping) | 1750 lbs (793.8 kg) |
| Rating Operating Capacity (50% Tipping) | 2350 lbs (1065.9 kg) |
| Operating Weight | 7000 lbs (3175.4 kg) |
| Tipping Load | 5000 lbs (2268.0 kg) |
| Lift Breakout Force | 5200 lbs (2358.7 kg) |
| Tilt Breakout Force | 6300 lbs (2857.6 kg) |
| Maximum Travel Speed | 7.6 mph (12.2 km) |
| Optional High Speed | 12.1 mph (19.6 km) |
| Pump Capacity | 17.6 GPM (66.6 LPM) |
| Relief Valve Pressure | 2600 psi (179.3 Bar) |
| Optional Pump Capacity | N/A |
| Hydraulic Tank Capacity | 6.8 gal (25.5 L) |
| Raise Lift Arms | 3.6 seconds |
| Lower Lift Arms | 1.5 seconds |
| Bucket Rollback | 1.8 seconds |
| Bucket Dump | 2.4 seconds |
| Engine Manufacturer | John Deere |
| Engine Model | 3029t |
| Engine Type | Diesel |
| No of Cylinders | 3 |
| Rated Speed | 2400 RPM |
| Torque Speed | 1600 RPM |
| Combustion Chamber | Direct injection |
| Emissions | Tier I |
| Compression Ratio | 17.8:1 |
| Firing Order | 1-2-3 |
| Gross Power | 64.4 HP (48.0 kW) |
| Displacement | 179 cu in. (2933 cc) |
| Bore | 4.2 in. (10.6 cm) |
| Stroke | 4.3 in. (11.0 cm) |
| Peak Torque | 109 ft-lb (148.1 N∙m) |
| Coolant Capacity | 2.8 gal (10.6 L) |
| Engine Oil Capacity | 2.0 gal (7.4 L) |
| Fuel Tank Capacity | 18.8 gal (71.2 L) |
| Cab Height | 72.0 in. (182.9 cm) |
| Bucket Hinge Pin Height | 122.0 in. (309.9 cm) |
| Width | 69.0 in. (175.3 cm) |
| Length with Bucket | 142.0 in. (360.7 cm) |
| Dump Height | 97.0 in. (246.4 cm) |
| Dump Reach | 30.0 in. (76.2 cm) |
| Ground Clearance | 8.0 in. (20.3 cm) |
| Dump Angle | 45° |
| Rollback Angle | 37° |
| Departure Angle | 28° |
| Front Tire | 12×16.5 |
| Rear Tire | 12×16.5 |
John Deere 8875 Specs (Weight, Lift Capacity, Hp, Dimensions)
Compare with Another Model
1
2
3
Another Models
