Case 1840 Specs (Weight, Lift Capacity, Hp, Dimensions)

Manufacturer Case
Type Skid steer
Model 1840
Lift Design Radial
Years Made 1989-2001
Horsepower 54.0 HP (40.3 kW)
Rating Operating Capacity (35% Tipping) 980 lbs (444.5 kg)
Rating Operating Capacity (50% Tipping) 1400 lbs (635.0 kg)
Operating Weight 5558 lbs (2521.1 kg)
Tipping Load 2800 lbs (1270.1 kg)
Lift Breakout Force 2773 lbs (1257.8 kg)
Tilt Breakout Force 3066 lbs (1390.7 kg)
Maximum Travel Speed 6.2 mph (10.0 km)
Pump Capacity 15.3 GPM (57.9 LPM)
Relief Valve Pressure 2300 psi (158.6 Bar)
Optional Pump Capacity N/A
Hydraulic Tank Capacity 10.5 gal (39.7 L)
Raise Lift Arms 4.7 seconds
Lower Lift Arms 2.6 seconds
Bucket Rollback 1.5 seconds
Bucket Dump 2.3 seconds
Engine Manufacturer Case
Engine Model 4-390
Engine Type Diesel
No of Cylinders 4
Rated Speed 2000 RPM
Torque Speed 1200 RPM
Combustion Chamber Direct injection
Compression Ratio 17.0.1
Firing Order 1-3-4-2
Gross Power 54.0 HP (40.3 kW)
Displacement 239 cu in. (3916.5 cc)
Bore 4.0 in. (10.2 cm)
Stroke 4.7 in. (12.0 cm)
Peak Torque 179 ft-lb (242.7 N∙m)
Coolant Capacity 4.5 gal (17.0 L)
Engine Oil Capacity 2.7 gal (10.4 L)
Fuel Tank Capacity 19.5 gal (73.8 L)
Cab Height 77 in. (195.6 cm)
Bucket Hinge Pin Height 110.5 in. (280.7 cm)
Width 54 in. (137.9 cm)
Length with Bucket 125 in. (317.5 cm)
Dump Height 84.0 in. (213.4 cm)
Dump Reach 22.0 in. (55.9 cm)
Ground Clearance 6.5 in. (16.5 cm)
Dump Angle 43°
Rollback Angle 29°
Departure Angle 27°
Front Tire 10 x 16.5
Rear Tire 10 x 16.5

Compare with Another Model

1
2
3