
Compare with other models
SPECS / WHEEL LOADERS
Clark Michigan 125C Specs
Clark Michigan 125C wheel loader specifications: type Wheel Loader, horsepower 160.0 kW, weight 19722.2 kg, tipping capacity 14660.1 kg.
Manufacturer specifications
| Specification | Metric | Imperial |
|---|---|---|
| Type | Wheel Loader | |
| Horsepower | 160.0 kW | 214.6 hp |
| Weight | 19722.2 kg | 43480 lbs |
| Tipping Capacity | 14660.1 kg | 32320 lbs |
| Max Speed | 31.1 km/h | 19.3 mph |
| Engine Model | LT-10-225 HT | |
| No Of Cylinders | 6 | |
| Displacement | 10012.5 cc | 611 cu in. |
| Alternator Supplied Amperage | 100 amps | |
| Operating Voltage | 24 V | |
| Rated Speed | 2000 RPM | |
| Torque Speed | 1300 RPM | |
| Net Power | 160.0 kW | 214.6 hp |
| Gross Power | 169.1 kW | 226.7 hp |
| Peak Torque | 1017.1 N-m | 750.2 lbs ft |
| Fuel Capacity | 284.3 l | 75.1 gal |
| Engine Oil Capacity | 34.1 l | 9 gal |
| Cooling Capacity | 57.2 l | 15.1 gal |
| Hydraulic System Capacity | 288.1 l | 76.1 gal |
| Transmission Oil Capacity | 40.1 l | 10.6 gal |
| Differential Front Capacity | 34.4 l | 9.1 gal |
| Differential Rear Capacity | 34.4 l | 9.1 gal |
| Transmission Type | Power shift | |
| No of Forward Gears | 4 | |
| No of Reverse Gears | 4 | |
| Rear Axle Oscillation | 18.5 ° | |
| Max Speed (Forward) | 31.1 km/h | 19.3 mph |
| Max Speed (Reverse) | 31.1 km/h | 19.3 mph |
| Pump type | Tandem gear type | |
| Pump Flow | 342.6 LPM | 90.5 GPM |
| Relief Pressure | 190.0 bar | 2755.8 psi |
| Raise Lift Arms | 7.4 sec | |
| Lower Lift Time | 3.2 sec | |
| Bucket Dump Time | 1.4 sec | |
| Operating Weight | 19722.2 kg | 43480 lbs |
| Tipping Load | 14660.1 kg | 32320 lbs |
| Bucket Capacity (Heaped) | 3.4 m³ | 4.5 cu yds |
| Bucket Capacity (Struck) | 2.9 m³ | 3.8 cu yds |
| Bucket Width | 304.8 cm | 120 in |
| Breakout Force | 17812.6 kg | 39270 lbs |
| Reach At Max Lift And Dump | 121.9 cm | 48 in |
| Dump Clearance At Max Raise | 304.8 cm | 120 in |
| Turning Radius | 762.0 cm | 300 in |
| Wheelbase | 335.3 cm | 132 in |
| Bucket Hinge Pin | 396.2 cm | 156 in |
| Cab Height | 335.3 cm | 132 in |
| Overall Length | 823.0 cm | 324 in |
| Ground Clearance | 30.5 cm | 12 in |
| Width Over Tires | 274.3 cm | 108 in |
| Tire Size | 23.5-25 |
Source: heavyequipments.net archive (imported 2026-10). Values may vary by variant and production year; seller claims are shown separately on the listing page.
