
SPECS / WHEEL LOADERS
Caterpillar 926K Specs
Caterpillar 926K wheel loader specifications: type Wheel Loader, horsepower 78.0 kW, weight 9298.6 kg, tipping capacity 6903.7 kg.
Manufacturer specifications
| Specification | Metric | Imperial |
|---|---|---|
| Type | Wheel Loader | |
| Horsepower | 78.0 kW | 104.6 hp |
| Weight | 9298.6 kg | 20500 lbs |
| Tipping Capacity | 6903.7 kg | 15220 lbs |
| Max Speed | 30.3 km/h | 18.8 mph |
| Engine Model | 3204 | |
| No Of Cylinders | 4 | |
| Aspiration | Turbocharged | |
| Displacement | 5199.6 cc | 317.3 cu in. |
| Alternator Supplied Amperage | 50 amps | |
| Operating Voltage | 24 V | |
| Rated Speed | 2400 RPM | |
| Net Power | 78.0 kW | 104.6 hp |
| Fuel Capacity | 149.9 l | 39.6 gal |
| Engine Oil Capacity | 14.0 l | 3.7 gal |
| Hydraulic System Capacity | 92.0 l | 24.3 gal |
| Transmission Oil Capacity | 34.1 l | 9 gal |
| Differential Front Capacity | 25.0 l | 6.6 gal |
| Differential Rear Capacity | 25.0 l | 6.6 gal |
| Transmission Type | Power shift | |
| No of Forward Gears | 4 | |
| No of Reverse Gears | 4 | |
| Rear Axle Oscillation | 30 ° | |
| Max Speed (Forward) | 30.3 km/h | 18.8 mph |
| Max Speed (Reverse) | 32.3 km/h | 20.1 mph |
| Pump Flow | 152.2 LPM | 40.2 GPM |
| Relief Pressure | 172.4 bar | 2500 psi |
| Raise Lift Arms | 5.9 sec | |
| Lower Lift Time | 3.6 sec | |
| Bucket Dump Time | 1.6 sec | |
| Operating Weight | 9298.6 kg | 20500 lbs |
| Tipping Load | 6903.7 kg | 15220 lbs |
| Reach At Max Lift And Dump | 91.4 cm | 36 in |
| Turning Radius | 518.2 cm | 204 in |
| Wheelbase | 274.3 cm | 108 in |
| Bucket Hinge Pin | 365.8 cm | 144 in |
| Cab Height | 304.8 cm | 120 in |
| Overall Length | 670.6 cm | 264 in |
| Ground Clearance | 30.5 cm | 12 in |
| Width Over Tires | 243.8 cm | 96 in |
Source: heavyequipments.net archive (imported 2026-10). Values may vary by variant and production year; seller claims are shown separately on the listing page.
