Case 921E Specs (Weight, Lift Capacity, Hp, Dimensions)

Manufacturer Case
Model 921E
Type Wheel Loader
Horsepower 297 hp (221,5 kW)
Weight 50620 lbs (22960,8 kg)
Tipping Capacity 42590 lbs (19318,5 kg)
Max Speed 23.2 mph (37,3 km/h)
Engine Model QSM 11, Tier III
No Of Cylinders 6
Aspiration Turbocharged with Aftercooler
Displacement 660 cu in. (10815,5 cc)
Alternator Supplied Amperage 95 amps
Operating Voltage 24 V
Rated Speed 1800 RPM
Torque Speed 900 RPM
Net Power 297 hp (221,5 kW)
Gross Power 274 hp (204,3 kW)
Peak Torque 1013 lbs ft (1373,4 N-m)
Fuel Capacity 104 gal (393,7 l)
Engine Oil Capacity 9.8 gal (37,1 l)
Cooling Capacity 15 gal (56,8 l)
Hydraulic System Capacity 64 gal (242,3 l)
Transmission Oil Capacity 10.5 gal (39,7 l)
Differential Front Capacity 12.5 gal (47,3 l)
Differential Rear Capacity 12.5 gal (47,3 l)
Transmission Type Proportional with Electronic Control Module
No of Forward Gears 4
No of Reverse Gears 3
Rear Axle Oscillation 24°
Max Speed (Forward) 23.2 mph (37,3 km/h)
Max Speed (Reverse) 16.1 mph (25,9 km/h)
Pump type Closed centered pressure/flow compensated
Pump Flow 42.8 GPM (162,0 LPM)
Relief Pressure 3600 psi (248,2 bar)
Raise Lift Arms 6.2 sec
Lower Lift Time 3 sec
Bucket Dump Time 3.6 sec
Operating Weight 50620 lbs (22960,8 kg)
Tipping Load 42590 lbs (19318,5 kg)
Bucket Capacity (Heaped) 5.8 cu yds (4,4 m³)
Bucket Capacity (Struck) 4.9 cu yds (3,7 m³)
Bucket Width 120 in (304,8 cm)
Breakout Force 44480 lbs (20175,8 kg)
Reach At Max Lift And Dump 48 in (121,9 cm)
Dump Clearance At Max Raise 120 in (304,8 cm)
Turning Radius 276 in (701,0 cm)
Wheelbase 132 in (335,3 cm)
Bucket Hinge Pin 168 in (426,7 cm)
Cab Height 144 in (365,8 cm)
Overall Length 348 in (883,9 cm)
Ground Clearance 24 in (61,0 cm)
Width Over Tires 120 in (304,8 cm)
Tire Size 26.5 x 25 L3 Bias

Compare with Another Model

1
2
3