Case 821E Specs (Weight, Lift Capacity, Hp, Dimensions)

Manufacturer Case
Model 821E
Type Wheel Loader
Horsepower 198 hp (147,6 kW)
Weight 37840 lbs (17163,9 kg)
Tipping Capacity 31380 lbs (14233,7 kg)
Max Speed 23 mph (37,0 km/h)
Engine Model Family IV, 667TA/EBD Tier III
No Of Cylinders 6
Aspiration Turbocharged and Aftercooled
Displacement 411 cu in. (6735,1 cc)
Alternator Supplied Amperage 70 amps
Operating Voltage 24 V
Rated Speed 1800 RPM
Torque Speed 1400 RPM
Net Power 198 hp (147,6 kW)
Gross Power 210 hp (156,6 kW)
Peak Torque 724 lbs ft (981,6 N-m)
Fuel Capacity 76 gal (287,7 l)
Engine Oil Capacity 5.6 gal (21,2 l)
Cooling Capacity 110.8 gal (419,4 l)
Hydraulic System Capacity 46 gal (174,1 l)
Transmission Oil Capacity 10.5 gal (39,7 l)
Differential Front Capacity 9.9 gal (37,5 l)
Differential Rear Capacity 6.3 gal (23,8 l)
Transmission Type Proportional w/Electronic Control Module
No of Forward Gears 4
No of Reverse Gears 3
Rear Axle Oscillation 24°
Max Speed (Forward) 23 mph (37,0 km/h)
Max Speed (Reverse) 15.7 mph (25,3 km/h)
Pump type Closed centered pressure/flow compensated
Pump Flow 31.6 GPM (119,6 LPM)
Relief Pressure 3600 psi (248,2 bar)
Raise Lift Arms 5.6 sec
Lower Lift Time 2.8 sec
Bucket Dump Time 1.2 sec
Operating Weight 37840 lbs (17163,9 kg)
Tipping Load 31380 lbs (14233,7 kg)
Bucket Capacity (Heaped) 4.4 cu yds (3,4 m³)
Bucket Capacity (Struck) 3.8 cu yds (2,9 m³)
Bucket Width 120 in (304,8 cm)
Breakout Force 34420 lbs (15612,6 kg)
Reach At Max Lift And Dump 48 in (121,9 cm)
Dump Clearance At Max Raise 120 in (304,8 cm)
Turning Radius 240 in (609,6 cm)
Wheelbase 132 in (335,3 cm)
Bucket Hinge Pin 168 in (426,7 cm)
Cab Height 132 in (335,3 cm)
Overall Length 312 in (792,5 cm)
Ground Clearance 12 in (30,5 cm)
Width Over Tires 108 in (274,3 cm)
Tire Size 23.5 x 25 l2 bias

Compare with Another Model

1
2
3