
Compare with other models
SPECS / SKID STEERS
Case 1845 Specs
Case 1845 skid steer specifications: type Skid steer, lift design Radial, years made 1975-1982, horsepower 36.5 kW.
Manufacturer specifications
| Specification | Metric | Imperial |
|---|---|---|
| Type | Skid steer | |
| Lift Design | Radial | |
| Years Made | 1975-1982 | |
| Horsepower | 36.5 kW | 49.0 HP |
| Rating Operating Capacity (35% Tipping) | 476.3 kg | 1050 lbs |
| Rating Operating Capacity (50% Tipping) | 771.1 kg | 1700 lbs |
| Operating Weight | 2642.2 kg | 5825 lbs |
| Tipping Load | 1324.5 kg | 2920 lbs |
| Lift Breakout Force | 1474.2 kg | 3250 lbs |
| Tilt Breakout Force | 2213.5 kg | 4880 lbs |
| Maximum Travel Speed | 10.0 km | 6.2 mph |
| Pump Capacity | 63.6 LPM | 16.8 GPM |
| Relief Valve Pressure | 155.1 Bar | 2250 psi |
| Hydraulic Tank Capacity | 63.6 L | 16.8 gal |
| Raise Lift Arms | 4.5 seconds | |
| Lower Lift Arms | 4.0 seconds | |
| Bucket Rollback | 1.7 seconds | |
| Bucket Dump | 2.3 seconds | |
| Engine Manufacturer | Case | |
| Engine Model | 159 G | |
| Engine Type | Gasoline | |
| No of Cylinders | 4 | |
| Rated Speed | 2200 RPM | |
| Compression Ratio | 7.42:1 | |
| Firing Order | 1-3-4-2 | |
| Gross Power | 36.5 kW | 49.0 HP |
| Displacement | 2606 cc | 159 cu in. |
| Bore | 8.9 cm | 3.5 in. |
| Stroke | 10.5 cm | 4.1 in. |
| Coolant Capacity | 7.6 L | 2.0 gal |
| Engine Oil Capacity | 4.7 L | 1.2 gal |
| Fuel Tank Capacity | 73.8 L | 19.5 gal |
| Cab Height | 210.8 cm | 83 in. |
| Bucket Hinge Pin Height | 353.1 cm | 117.0 in. |
| Width | 160.0 cm | 63 in. |
| Length with Bucket | 322.6 cm | 127.0 in. |
| Dump Height | 228.6 cm | 90.0 in. |
| Dump Reach | 55.9 cm | 22.0 in. |
| Ground Clearance | 20.3 cm | 8.0 in. |
| Dump Angle | 41 ° | |
| Rollback Angle | 29 ° | |
| Departure Angle | 28 ° | |
| Front Tire | 7.5×16 | |
| Rear Tire | 7.5×16 |
Source: heavyequipments.net archive (imported 2026-10). Values may vary by variant and production year; seller claims are shown separately on the listing page.
