SPECS / COMPARISON
John Deere 280 Series 2 vs Case 95XT
A detailed comparison of the John Deere 280 Series 2 and the Case 95XT. Click a model name to view its full specifications.
Horsepower
John Deere 280 Series 267.1 kW (90.0 HP)
Case 95XT63.4 kW (85.0 HP)
Operating Weight
John Deere 280 Series 24173.4 kg (9200 lbs)
Case 95XT4105.0 kg (9050 lbs)
| Specification | John Deere 280 Series 2 Skid Steers | Case 95XT Skid Steers |
|---|---|---|
| Type | Skid steer | Skid steer |
| Lift Design | Vertical | Radial |
| Years Made | 2002-2006 | 2001-2005 |
| Horsepower | 67.1 kW (90.0 HP) | 63.4 kW (85.0 HP) |
| Rating Operating Capacity (35% Tipping) | 1097.7 kg (2420 lbs) | 1020.6 kg (2250 lbs) |
| Rating Operating Capacity (50% Tipping) | 1451.5 kg (3200 lbs) | 1428.8 kg (3150 lbs) |
| Operating Weight | 4173.4 kg (9200 lbs) | 4105.0 kg (9050 lbs) |
| Tipping Load | 3175.1 kg (7000 lbs) | 2857.6 kg (6300 lbs) |
| Lift Breakout Force | 5261.7 kg (11600 lbs) | 2630.8 kg (5800 lbs) |
| Maximum Travel Speed | 11.3 km (7.0 mph) | 11.4 km (7.1 mph) |
| Optional High Speed | 19.3 km (12.0 mph) | 17.9 km (11.1 mph) |
| Pump Capacity | 106.0 LPM (28.0 GPM) | 86.3 LPM (22.8 GPM) |
| Relief Valve Pressure | 213.7 Bar (3100 psi) | 206.8 Bar (3000 psi) |
| Optional Pump Capacity | 183.6 LPM (48.5 GPM) | — |
| Hydraulic Tank Capacity | 34.1 L (9.0 gal) | 66.3 L (17.5 gal) |
| Engine Manufacturer | John Deere | Case |
| Engine Model | 4045 T | 4 T-390 |
| Engine Type | Diesel | Diesel |
| No of Cylinders | 4 | 4 |
| Rated Speed | 2400 RPM | 2200 RPM |
| Torque Speed | 1600 RPM | 1500 RPM |
| Combustion Chamber | Direct injection | Direct injection |
| Emissions | Tier I | Tier 2 |
| Compression Ratio | 17.6:1 | 17.0.1 |
| Firing Order | 1-3-4-2 | 1-3-4-2 |
| Gross Power | 67.1 kW (90.0 HP) | 63.4 kW (85.0 HP) |
| Displacement | 4523 cc (276 cu in.) | 3916.5 cc (239 cu in.) |
| Bore | 10.6 cm (4.2 in.) | 10.2 cm (4.0 in.) |
| Stroke | 12.7 cm (5.0 in.) | 12.0 cm (4.7 in.) |
| Coolant Capacity | 20.8 L (5.5 gal) | 16.6 L (4.4 gal) |
| Engine Oil Capacity | 13.3 L (3.5 gal) | 10.4 L (2.7 gal) |
| Fuel Tank Capacity | 90.8 L (24.0 gal) | 76.5 L (20.2 gal) |
| Cab Height | 210.5 cm (82.9 in.) | 203.2 cm (80.0 in.) |
| Bucket Hinge Pin Height | 322.6 cm (127.0 in.) | 318.8 cm (125.5 in.) |
| Width | 196.1 cm (77.2 in.) | 163.8 cm (64.5 in.) |
| Length with Bucket | 350.4 cm (138.0 in.) | 382.8 cm (150.7 in.) |
| Dump Height | 259.1 cm (102.0 in.) | 241.3 cm (95.0 in.) |
| Dump Reach | 81.3 cm (32.0 in.) | 93.5 cm (36.8 in.) |
| Ground Clearance | 24.1 cm (9.5 in.) | 23.1 cm (9.1 in.) |
| Dump Angle | 45 ° | 40 ° |
| Rollback Angle | 35 ° | 27 ° |
| Departure Angle | 27 ° | 28 ° |
| Front Tire | 14×17.5 | 15.5×16.5 |
| Rear Tire | 14×17.5 | 15.5×16.5 |
| Tilt Breakout Force | — | 2800.9 kg (6175 lbs) |
| Raise Lift Arms | — | 4.1 seconds |
| Lower Lift Arms | — | 3.5 seconds |
| Bucket Rollback | — | 1.7 seconds |
| Bucket Dump | — | 2.3 seconds |
| Peak Torque | — | 344 N∙m (254 ft-lb) |
Values come from the manufacturer-sourced model files; empty cells mean the property is not published for that model. No performance ranking is applied.
Other comparisons
- Case 95XT Vs Bobcat A300 ↗
- New Holland L230 Vs John Deere 280 Series 2 ↗
- John Deere 280 Series 2 Vs Bobcat S750 ↗
- John Deere 280 Series 2 Vs Bobcat A770 ↗
- New Holland L230 Vs Case 95XT ↗
- Gehl V330 Vs Case 95XT ↗
- John Deere 280 Series 2 Vs Bobcat S330 ↗
- Cat 272d Vs John Deere 280 Series 2 ↗
- Bobcat S750 Vs Case 95XT ↗