Case 450 Specs (Weight, Lift Capacity, Hp, Dimensions)

Manufacturer Case
Type Skid steer
Model 450
Lift Design Radial
Years Made 2005-2007
Horsepower 90.0 HP (67.1 kW)
Rating Operating Capacity (50% Tipping) 2450 lbs (1111.3 kg)
Operating Weight 8630 lbs (3914.5 kg)
Tipping Load 4900 lbs (2222.6 kg)
Lift Breakout Force 5689 lbs (2580.5 kg)
Tilt Breakout Force 7213 lbs (3271.8 kg)
Maximum Travel Speed 6.2 mph (10.0 km)
Optional High Speed 11.3 mph (18.1 km)
Pump Capacity 21.9 GPM (83.0 LPM)
Relief Valve Pressure 3050 psi (210.3 Bar)
Optional Pump Capacity 41.8 GPM (158.0 LPM)
Hydraulic Tank Capacity 17.0 gal (64.4 L)
Raise Lift Arms 3.5 seconds
Lower Lift Arms 2.2 seconds
Bucket Rollback 1.6 seconds
Bucket Dump 2.2 seconds
Engine Manufacturer Case
Engine Model 445T/M3
Engine Type Diesel
No of Cylinders 4
Rated Speed 2300 RPM
Torque Speed 1300 RPM
Combustion Chamber Direct injection
Emissions Tier III
Compression Ratio 17:1
Firing Order 1-3-4-2
Gross Power 90.0 HP (67.1 kW)
Displacement 273.7 cu in. (4485 cc)
Bore 4.1 in. (10.4 cm)
Stroke 5.2 in. (13.2 cm)
Peak Torque 288 ft-lb (390.5 N∙m)
Coolant Capacity 3.0 gal (11.4 L)
Engine Oil Capacity 3.2 gal (12.0 L)
Fuel Tank Capacity 20.7 gal (78.3 L)
Cab Height 83.2 in. (211.3 cm)
Bucket Hinge Pin Height 124.5 in. (316.2 cm)
Width 72.2 in. (183.2 cm)
Length with Bucket 140.7 in. (357.4 cm)
Dump Height 94.4 in. (239.8 cm)
Dump Reach 26.4 in. (67.1 cm)
Ground Clearance 9.2 in. (23.4 cm)
Dump Angle 44°
Rollback Angle 30°
Departure Angle 26°
Front Tire 12 x 16.5
Rear Tire 12 x 16.5

Compare with Another Model

1
2
3