Case 40xt Specs (Weight, Lift Capacity, Hp, Dimensions)

Manufacturer Case
Type Skid steer
Model 40XT
Lift Design Radial
Years Made 2001-2005
Horsepower 60.0 HP (44.7 kW)
Rating Operating Capacity (35% Tipping) 1060 lbs (480.8 kg)
Rating Operating Capacity (50% Tipping) 1500 lbs (680.4 kg)
Operating Weight 5700 lbs (2585.5 kg)
Tipping Load 3000 lbs (1360.8 kg)
Lift Breakout Force 3800 lbs (1723.7 kg)
Tilt Breakout Force 4000 lbs (1814.4 kg)
Maximum Travel Speed 6.8 mph (11.0 km)
Pump Capacity 19.1 GPM (72.2 LPM)
Relief Valve Pressure 3000 psi (206.8 Bar)
Optional Pump Capacity N/A
Hydraulic Tank Capacity 13.3 gal (50.2 L)
Raise Lift Arms 3.6 seconds
Lower Lift Arms 2.1 seconds
Bucket Rollback 1.8 seconds
Bucket Dump 1.9 seconds
Engine Manufacturer Case
Engine Model 4-390
Engine Type Diesel
No of Cylinders 4
Rated Speed 2000 RPM
Torque Speed 1200 RPM
Combustion Chamber Direct injection
Compression Ratio 17.0.1
Firing Order 1-3-4-2
Gross Power 60.0 HP (44.7 kW)
Displacement 239 cu in. (3916.5 cc)
Bore 4.0 in. (10.2 cm)
Stroke 4.7 in. (12.0 cm)
Peak Torque 177 ft-lb (240 N∙m)
Coolant Capacity 4.5 gal (17.0 L)
Engine Oil Capacity 2.7 gal (10.4 L)
Fuel Tank Capacity 22.0 gal (83.3 L)
Cab Height 75.5 in. (191.8 cm)
Bucket Hinge Pin Height 114.6 in. (291.1 cm)
Width 49 in. (124.5 cm)
Length with Bucket 129 in. (327.7 cm)
Dump Height 85.9 in. (218.2 cm)
Dump Reach 28.1 in. (71.4 cm)
Ground Clearance 8.0 in. (20.3 cm)
Dump Angle 40°
Rollback Angle 32°
Departure Angle 27°
Front Tire 10 x 16.5
Rear Tire 10 x 16.5

Compare with Another Model

1
2
3