Bobcat S66 vs New Holland L180

Specification	Bobcat S66Skid Steers	New Holland L180Skid Steers
Type	Skid steer	Skid steer
Lift Design	Vertical	Vertical
Years Made	2020-2022	2008-2012
Horsepower	50.7 kW (74.0 HP)	55.2 kW (74.0 HP)
Rating Operating Capacity (50% Tipping)	1088.6 kg (2400 lbs)	997.9 kg (2200 lbs)
Operating Weight	3245.0 kg (7154 lbs)	3234.1 kg (7130 lbs)
Tipping Load	2177.2 kg (4800 lbs)	1995.8 kg (4400 lbs)
Lift Breakout Force	2245.3 kg (4950 lbs)	1902.4 kg (4194 lbs)
Tilt Breakout Force	2449.4 kg (5400 lbs)	2735.0 kg (6034 lbs)
Maximum Travel Speed	11.9 km (7.4 mph)	11.2 km (7.0 mph)
Optional High Speed	17.7 km (11.0 mph)	18.2 km (11.3 mph)
Pump Capacity	66.5 LPM (17.6 GPM)	79.5 LPM (21.0 GPM)
Relief Valve Pressure	241.3 Bar (3500 psi)	210.3 Bar (3050 psi)
Optional Pump Capacity	101.8 LPM (26.9 GPM)	135.5 LPM (35.8 GPM)
Hydraulic Tank Capacity	36.0 L (9.5 gal)	18.9 L (5.0 gal)
Raise Lift Arms	3.8 seconds	2.8 seconds
Lower Lift Arms	2.5 seconds	1.8 seconds
Bucket Rollback	1.7 seconds	1.6 seconds
Bucket Dump	2.3 seconds	2.5 seconds
Engine Manufacturer	Bobcat	FPT
Engine Model	2.4 L V2	F5C E9454
Engine Type	Diesel	Diesel
No of Cylinders	4	4
Rated Speed	2600 RPM	2600 RPM
Torque Speed	1800 RPM	1400 RPM
Combustion Chamber	Direct injection	—
Emissions	Tier 4	Tier 3
Compression Ratio	17.0:1	—
Firing Order	1-3-4-2	1-3-4-2
Gross Power	50.7 kW (74.0 HP)	55.2 kW (74.0 HP)
Displacement	2401 cc (146.5 cu.in.)	3195 cc (195 cu in.)
Peak Torque	266.3 N∙m (196.4 ft-lb)	275.2 N∙m (203 ft-lb)
Coolant Capacity	11.3 L (3.0 gal)	11.4 L (3.0 gal)
Engine Oil Capacity	9.0 L (2.4 gal)	8.5 L (2.2 gal)
Fuel Tank Capacity	107.1 L (28.3 gal)	86.7 L (22.9 gal)
Cab Height	204.5 cm (80.5 in.)	199.9 cm (78.7 in.)
Bucket Hinge Pin Height	304.8 cm (120.0 in.)	321.9 cm (126.8 in.)
Width	167.6 cm (64.6 in.)	181.1 cm (71.3 in.)
Length with Bucket	342.9 cm (135.0 in.)	381.8 cm (150.3 in.)
Dump Reach	86.9 cm (34.2 in.)	100.3 cm (39.5 in.)
Front Tire	10-16.5	12×16.5
Rear Tire	10-16.5	12×16.5
Rating Operating Capacity (35% Tipping)	—	703.1 kg (1550 lbs)
Bore	—	9.9 cm (3.9 in.)
Stroke	—	10.4 cm (4.1 in.)
Dump Height	—	240.6 cm (94.7 in.)
Ground Clearance	—	22.6 cm (8.9 in.)
Dump Angle	—	45 °
Rollback Angle	—	37 °
Departure Angle	—	26 °

Values come from the manufacturer-sourced model files; empty cells mean the property is not published for that model. No performance ranking is applied.