| Manufacturer | Bobcat |
|---|---|
| Type | Skid steer |
| Model | S250 |
| Lift Design | Vertical |
| Years Made | 2002-2010 |
| Horsepower | 75.0 HP (55.9 kW) |
| Rating Operating Capacity (35% Tipping) | 1900 lbs (861.8 kg) |
| Rating Operating Capacity (50% Tipping) | 2500 lbs (1134.0 kg) |
| Operating Weight | 7674 lbs (3480.9 kg) |
| Tipping Load | 5707 lbs (2588.7 kg) |
| Lift Breakout Force | 6300 lbs (2857.6 kg) |
| Tilt Breakout Force | 6840 lbs (3102.6 kg) |
| Maximum Travel Speed | 12.5 mph (20.1 km) |
| Pump Capacity | 20.7 GPM (78.4 LPM) |
| Relief Valve Pressure | 3300 psi (227.5 Bar) |
| Optional Pump Capacity | 30.7 GPM (116.2 LPM) |
| Hydraulic Tank Capacity | 13.0 gal (49.2 L) |
| Raise Lift Arms | 4.4 seconds |
| Lower Lift Arms | 3.2 seconds |
| Bucket Rollback | 1.9 seconds |
| Bucket Dump | 2.5 seconds |
| Engine Manufacturer | Deutz |
| Engine Model | BF4M1011F |
| Engine Type | Diesel |
| No of Cylinders | 4 |
| Rated Speed | 2350 RPM |
| Torque Speed | 1800 RPM |
| Combustion Chamber | Direct injection |
| Emissions | Tier 3 |
| Compression Ratio | 17.1 |
| Firing Order | 1-3-4-2 |
| Gross Power | 75.0 HP (55.9 kW) |
| Displacement | 177 cu. in. (2912 cc) |
| Bore | 3.6 in. (9.1 cm) |
| Stroke | 4.4 in. (11.2 cm) |
| Peak Torque | 176 ft-lb (238.6 N∙m) |
| Coolant Capacity | 4.0 gal (15.1 L) |
| Engine Oil Capacity | 2.5 gal (9.4 L) |
| Fuel Tank Capacity | 25.0 gal (94.6 L) |
| Cab Height | 80.9 in. (205.5 cm) |
| Bucket Hinge Pin Height | 126.4 in. (321.1 cm) |
| Width | 72.0 in. (182.9 cm) |
| Length with Bucket | 142.9 in. (363.0 cm) |
| Dump Height | 99.4 in. (252.5 cm) |
| Dump Reach | 34.0 in. (86.4 cm) |
| Ground Clearance | 8.5 in. (21.6 cm) |
| Dump Angle | 42° |
| Rollback Angle | 25° |
| Departure Angle | 23° |
| Front Tire | 12-16.5 |
| Rear Tire | 12-16.5 |
Bobcat S250 Specs (Weight, Lift Capacity, Hp, Dimensions)
Compare with Another Model
1
2
3
Another Models
