
Compare with other models
SPECS / SKID STEERS
Bobcat 843 Specs
Bobcat 843 skid steer specifications: type Skid steer, lift design Vertical, years made 1985-1992, horsepower 40.3 kW.
Manufacturer specifications
| Specification | Metric | Imperial |
|---|---|---|
| Type | Skid steer | |
| Lift Design | Vertical | |
| Years Made | 1985-1992 | |
| Horsepower | 40.3 kW | 54.0 HP |
| Rating Operating Capacity (35% Tipping) | 521.6 kg | 1150 lbs |
| Rating Operating Capacity (50% Tipping) | 771.1 kg | 1700 lbs |
| Operating Weight | 2948.4 kg | 6500 lbs |
| Tipping Load | 1542.2 kg | 3400 lbs |
| Maximum Travel Speed | 10.1 km | 6.3 mph |
| Pump Capacity | 58.3 LPM | 15.4 GPM |
| Relief Valve Pressure | 172.4 Bar | 2500 psi |
| Hydraulic Tank Capacity | 14.7 L | 3.9 gal |
| Raise Lift Arms | 4.8 seconds | |
| Lower Lift Arms | 3.8 seconds | |
| Bucket Rollback | 2.1 seconds | |
| Bucket Dump | 2.2 seconds | |
| Engine Manufacturer | Perkins | |
| Engine Model | 4.154 | |
| Engine Type | Diesel | |
| No of Cylinders | 4 | |
| Rated Speed | 2600 RPM | |
| Torque Speed | 1800 RPM | |
| Combustion Chamber | Indirect injection | |
| Compression Ratio | 21.5:1 | |
| Firing Order | 1-3-4-2 | |
| Gross Power | 43.3 kW | 58.0 HP |
| Displacement | 2523 cc | 153.9 cu. in. |
| Bore | 7.6 cm | 3.5 in. |
| Stroke | 10.2 cm | 4.0 in. |
| Peak Torque | 153.2 N∙m | 113 ft-lb |
| Coolant Capacity | 21.0 L | 5.5 gal |
| Engine Oil Capacity | 9.0 L | 2.4 gal |
| Fuel Tank Capacity | 83.0 L | 21.9 gal |
| Cab Height | 204.2 cm | 80.4 in. |
| Bucket Hinge Pin Height | 303.7 cm | 119.6 in. |
| Width | 154.3 cm | 60.8 in. |
| Length with Bucket | 333.8 cm | 131.4 in. |
| Dump Height | 239.9 cm | 94.5 in. |
| Dump Reach | 62.7 cm | 24.7 in. |
| Ground Clearance | 21.2 cm | 8.4 in. |
| Dump Angle | 37 ° | |
| Rollback Angle | 25 ° | |
| Departure Angle | 28 ° | |
| Front Tire | 8.25 x 15 | |
| Rear Tire | 8.25 x 15 |
Source: heavyequipments.net archive (imported 2026-10). Values may vary by variant and production year; seller claims are shown separately on the listing page.
