
Compare with other models
SPECS / SKID STEERS
Bobcat 825 Specs
Bobcat 825 skid steer specifications: type Skid steer, lift design Radial, years made 1974-1982, horsepower 28.3 kW.
Manufacturer specifications
| Specification | Metric | Imperial |
|---|---|---|
| Type | Skid steer | |
| Lift Design | Radial | |
| Years Made | 1974-1982 | |
| Horsepower | 28.3 kW | 38.0 HP |
| Rating Operating Capacity (35% Tipping) | 476.3 kg | 1050 lbs |
| Rating Operating Capacity (50% Tipping) | 680.4 kg | 1500 lbs |
| Operating Weight | 2630.8 kg | 5800 lbs |
| Tipping Load | 1406.1 kg | 3100 lbs |
| Maximum Travel Speed | 11.7 km | 7.3 mph |
| Pump Capacity | 47.3 LPM | 12.5 GPM |
| Relief Valve Pressure | 144.8 Bar | 2100 psi |
| Hydraulic Tank Capacity | 102.2 L | 27.0 gal |
| Raise Lift Arms | 4.8 seconds | |
| Lower Lift Arms | 3.8 seconds | |
| Bucket Rollback | 2.1 seconds | |
| Bucket Dump | 2.2 seconds | |
| Engine Manufacturer | Perkins | |
| Engine Model | 4.154 | |
| Engine Type | Diesel | |
| No of Cylinders | 4 | |
| Rated Speed | 2500 RPM | |
| Torque Speed | 1900 RPM | |
| Combustion Chamber | Indirect injection | |
| Compression Ratio | 22:1 | |
| Firing Order | 1-3-4-2 | |
| Gross Power | 28.3 kW | 38.0 HP |
| Displacement | 1760 cc | 107.4 cu. in. |
| Bore | 7.9 cm | 3.1 in. |
| Stroke | 8.9 cm | 3.5 in. |
| Peak Torque | 108 N∙m | 80 ft-lb |
| Coolant Capacity | 9.5 L | 2.5 gal |
| Engine Oil Capacity | 5.7 L | 1.5 gal |
| Fuel Tank Capacity | 125.0 L | 33.0 gal |
| Cab Height | 215.9 cm | 85.0 in. |
| Bucket Hinge Pin Height | 304.8 cm | 120.0 in. |
| Width | 154.3 cm | 60.8 in. |
| Dump Height | 239.5 cm | 94.3 in. |
| Dump Reach | 54.0 cm | 21.3 in. |
| Ground Clearance | 24.8 cm | 9.8 in. |
| Dump Angle | 39 ° | |
| Rollback Angle | 26 ° | |
| Departure Angle | 32 ° | |
| Front Tire | 8.25×15 | |
| Rear Tire | 8.25×15 |
Source: heavyequipments.net archive (imported 2026-10). Values may vary by variant and production year; seller claims are shown separately on the listing page.
