| Manufacturer | Zettelmeyer |
|---|---|
| Model | ZL802Si |
| Type | Wheel Loader |
| Horsepower | 80 hp (59,7 kW) |
| Weight | 15870 lbs (7198,5 kg) |
| Tipping Capacity | 9630 lbs (4368,1 kg) |
| Max Speed | 21.8 mph (35,1 km/h) |
| Engine Model | KHD BF 4M 1012 E |
| Engine Type | Water-cooled |
| No Of Cylinders | 4 |
| Aspiration | Turbocharged |
| Displacement | 195.3 cu in. (3200,4 cc) |
| Alternator Supplied Amperage | 55 amps |
| Operating Voltage | 24 V |
| Rated Speed | 2300 RPM |
| Torque Speed | 1500 RPM |
| Net Power | 80 hp (59,7 kW) |
| Gross Power | 83 hp (61,9 kW) |
| Peak Torque | 221.3 lbs ft (300,0 N-m) |
| Fuel Capacity | 26.5 gal (100,3 l) |
| Engine Oil Capacity | 2.4 gal (9,1 l) |
| Hydraulic System Capacity | 29.1 gal (110,2 l) |
| Differential Front Capacity | 2.3 gal (8,7 l) |
| Differential Rear Capacity | 3.1 gal (11,7 l) |
| Transmission Type | Power shift |
| No of Forward Gears | 3 |
| No of Reverse Gears | 2 |
| Rear Axle Oscillation | 20° |
| Max Speed (Forward) | 21.8 mph (35,1 km/h) |
| Max Speed (Reverse) | 9.1 mph (14,6 km/h) |
| Pump type | Gear |
| Pump Flow | 23.8 GPM (90,1 LPM) |
| Relief Pressure | 3045 psi (209,9 bar) |
| Raise Lift Arms | 6 sec |
| Lower Lift Time | 5.5 sec |
| Bucket Dump Time | 2 sec |
| Operating Weight | 15870 lbs (7198,5 kg) |
| Tipping Load | 9630 lbs (4368,1 kg) |
| Bucket Capacity (Heaped) | 1.3 cu yds (1,0 m³) |
| Bucket Width | 84 in (213,4 cm) |
| Breakout Force | 14160 lbs (6422,9 kg) |
| Reach At Max Lift And Dump | 36 in (91,4 cm) |
| Dump Clearance At Max Raise | 108 in (274,3 cm) |
| Turning Radius | 180 in (457,2 cm) |
| Wheelbase | 84 in (213,4 cm) |
| Bucket Hinge Pin | 132 in (335,3 cm) |
| Cab Height | 108 in (274,3 cm) |
| Overall Length | 216 in (548,6 cm) |
| Ground Clearance | 24 in (61,0 cm) |
| Width Over Tires | 84 in (213,4 cm) |
| Tire Size | 15.5-25 |
Zettelmeyer ZL802Si Specs (Weight, Lift Capacity, Hp, Dimensions)
Compare with Another Model
1
2
3
Another Models
