SPECS / COMPARISON
Caterpillar D4C LGP III HYSTAT vs Zettelmeyer ZL1002Si
A detailed comparison of the Caterpillar D4C LGP III HYSTAT and the Zettelmeyer ZL1002Si. Click a model name to view its full specifications.
Horsepower
Caterpillar D4C LGP III HYSTAT65.6 kW (88 HP)
Zettelmeyer ZL1002Si65.6 kW (88 hp)
Operating Weight
Caterpillar D4C LGP III HYSTAT7785.0 kg (17163 lbs)
Zettelmeyer ZL1002Si7602.2 kg (16760 lbs)
| Specification | Caterpillar D4C LGP III HYSTAT Crawler Dozers | Zettelmeyer ZL1002Si Crawler Dozers |
|---|---|---|
| Type | Crawler Dozer | Wheel Loader |
| Horsepower | 65.6 kW (88 HP) | 65.6 kW (88 hp) |
| Operating Weight | 7785.0 kg (17163 lbs) | 7602.2 kg (16760 lbs) |
| Pump Flow | 66.6 LPM (17.6 GPM) | 106.4 LPM (28.1 GPM) |
| Engine Manufacturer | Caterpillar | — |
| Engine Model | 3046 | KHD BF 4M 1013 E |
| Gross Power | 65.6 kW (88 HP) | 68.6 kW (92 hp) |
| Net Power | 60.4 kW (81 HP) | 65.6 kW (88 hp) |
| Aspiration | Naturally | Turbocharged |
| Number of Cylinders | 6 | — |
| Displacement | 4998.1 cc (305 cu in.) | 4760.5 cc (290.5 cu in.) |
| Power Measured RPM | 2400 RPM | — |
| Alternator Supplied Amp. | 55 A | — |
| Alternator | 55 A | — |
| Battery | 12 V | — |
| Transmission Type | Hydrostatic | Power shift |
| Number of Forward Gears | 3 | — |
| Number of Reverse Gears | 3 | — |
| Max Speed Forward | 9.0 km/h (5.6 mph) | — |
| Max Speed Reverse | 9.0 km/h (5.6 mph) | — |
| Ground Pressure | 0.3 bar (4.3 psi) | — |
| Fuel Capacity | 157.1 l (41.5 gal) | 100.3 l (26.5 gal) |
| Engine Oil Capacity | 13.2 l (3.5 gal) | 12.1 l (3.2 gal) |
| Cooling System Capacity | 21.2 l (5.6 gal) | — |
| Hydraulic Capacity | 57.2 l (15.1 gal) | — |
| Final Drives Capacity | 21.6 l (5.7 gal) | — |
| Pump type | Gear type | Axial Piston Pump |
| Hydraulic Pump Flow | 66.6 LPM (17.6 GPM) | — |
| Relief Valve Pressure | 172.4 bar (2500 psi) | — |
| Cab Height | 274.3 cm (108.0 in.) | 274.3 cm (108 in) |
| Width Over Track | 231.6 cm (91.2 in.) | — |
| Length Overall | 402.3 cm (158.4 in.) | — |
| Length without Blade | 298.7 cm (117.6 in.) | — |
| Length of Track on Ground | 207.3 cm (81.6 in.) | — |
| Track Gauge | 167.6 cm (66.0 in.) | — |
| Ground Clearance | 39.6 cm (15.6 in.) | 61.0 cm (24 in) |
| Ground Contact Area | 66285.8 cm³ (4045 cu in.) | — |
| No of Shoes Per Side | 39 | — |
| No of Track Rollers Per Side | 6 | — |
| Shoe Size | 63.5 cm (25 in.) | — |
| Weight (Operating) | 7785.0 kg (17163 lbs) | — |
| Weight | — | 7602.2 kg (16760 lbs) |
| Tipping Capacity | — | 5298.0 kg (11680 lbs) |
| Max Speed | — | 33.2 km/h (20.6 mph) |
| Engine Type | — | Water-cooled |
| No Of Cylinders | — | 4 |
| Alternator Supplied Amperage | — | 55 amps |
| Operating Voltage | — | 24 V |
| Rated Speed | — | 2100 RPM |
| Torque Speed | — | 1400 RPM |
| Peak Torque | — | 392.1 N-m (289.2 lbs ft) |
| Hydraulic System Capacity | — | 110.2 l (29.1 gal) |
| Differential Front Capacity | — | 12.9 l (3.4 gal) |
| Differential Rear Capacity | — | 13.6 l (3.6 gal) |
| No of Forward Gears | — | 3 |
| No of Reverse Gears | — | 2 |
| Rear Axle Oscillation | — | 20 ° |
| Max Speed (Forward) | — | 33.2 km/h (20.6 mph) |
| Max Speed (Reverse) | — | 20.1 km/h (12.5 mph) |
| Relief Pressure | — | 230.0 bar (3335.9 psi) |
| Raise Lift Arms | — | 6 sec |
| Lower Lift Time | — | 5 sec |
| Bucket Dump Time | — | 1.5 sec |
| Tipping Load | — | 5298.0 kg (11680 lbs) |
| Bucket Capacity (Heaped) | — | 1.2 m³ (1.6 cu yds) |
| Bucket Width | — | 213.4 cm (84 in) |
| Breakout Force | — | 6577.1 kg (14500 lbs) |
| Reach At Max Lift And Dump | — | 91.4 cm (36 in) |
| Dump Clearance At Max Raise | — | 274.3 cm (108 in) |
| Turning Radius | — | 487.7 cm (192 in) |
| Wheelbase | — | 243.8 cm (96 in) |
| Bucket Hinge Pin | — | 335.3 cm (132 in) |
| Overall Length | — | 579.1 cm (228 in) |
| Width Over Tires | — | 213.4 cm (84 in) |
| Tire Size | — | 15.5-25 |
Values come from the manufacturer-sourced model files; empty cells mean the property is not published for that model. No performance ranking is applied.