SPECS / COMPARISON
Caterpillar 446B vs John Deere 310SL HL
A detailed comparison of the Caterpillar 446B and the John Deere 310SL HL. Click a model name to view its full specifications.
Horsepower
Caterpillar 446B82.0 kW (110 HP)
John Deere 310SL HL82.0 kW (110 HP)
Weight
Caterpillar 446B8890.4 kg (19600 lbs)
John Deere 310SL HL8377.8 kg (18470 lbs)
Operating Weight
Caterpillar 446B8890.4 kg (19600 lbs)
John Deere 310SL HL8377.8 kg (18470 lbs)
| Specification | Caterpillar 446B Backhoe Loaders | John Deere 310SL HL Backhoe Loaders |
|---|---|---|
| Horsepower | 82.0 kW (110 HP) | 82.0 kW (110 HP) |
| Weight | 8890.4 kg (19600 lbs) | 8377.8 kg (18470 lbs) |
| Transmission | Automatic powershift | Powershift |
| Pump Capacity | 178.3 LPM (47.1 GPM) | 159.4 LPM (42.1 GPM) |
| Lift Capacity | 3968.9 kg (8750 lbs) | — |
| Engine Manufacturer | Caterpillar | John Deere |
| Engine Model | 3114 DIT | PowerTech+ 4045HT096 |
| Gross Power | 82.0 kW (110 HP) | — |
| Net Power | 76.1 kW (102 HP) | 82.0 kW (110 HP) |
| No Of Cylinders | 4 | — |
| Engine Type | Diesel | Diesel |
| Displacement | 4391.7 cc (268 cu in) | 4501.5 cc (274.7 cu in) |
| Bore | 10.7 cm (4.2 in) | — |
| Stroke | 12.2 cm (4.8 in) | — |
| Power Measured | 2200 RPM | 2240 RPM |
| Fuel Capacity | 125.3 l (33.1 gal) | 140.1 l (37 gal) |
| Engine Oil With Filter | 11.0 l (2.9 gal) | — |
| Hydraulic System Capacity | 155.2 l (41 gal) | — |
| Hydraulic Oil Capacity | 29.9 l (7.9 gal) | 45.0 l (11.9 gal) |
| Transmission Oil Capacity | 26.1 l (6.9 gal) | — |
| Rear Axle Oil Capacity | 31.0 l (8.2 gal) | 18.2 l (4.8 gal) |
| Transmission Type | Automatic powershift | Powershift |
| Steering Type | Front Wheel | — |
| Brake System | Fully enclosed, hydraulic, multiple disk | — |
| Cab - Sound | ANSI/SAE J1166 May 90 is 81 dB | — |
| Exterior Sound | SAE J88 Jun 86, is 76dB | — |
| No Of Forward Gears | 4 | — |
| No Of Reverse Gears | 3 | — |
| Max Speed (Forward) | 31.5 km/h (19.6 mph) | — |
| Max Speed (Reverse) | 20.8 km/h (12.9 mph) | — |
| Pump Type | Variable flow, axial piston | Axial-piston |
| Pump Flow Capacity | 178.3 LPM (47.1 GPM) | 159.4 LPM (42.1 GPM) |
| Relief Valve Pressure | 224.1 bar (3250 psi) | — |
| Circuit Type | Closed center | — |
| Dig Depth | 518.2 cm (204 in) | — |
| Dig Depth (Extended) | 640.1 cm (252 in) | — |
| Bucket Dig Force | 6894.6 kg (15200 lbs) | — |
| Bucket Dig Force (E-Stick Extended) | 6871.9 kg (15150 lbs) | — |
| Stick Dig Force | 4898.8 kg (10800 lbs) | — |
| Loading Height | 426.7 cm (168 in) | — |
| Loading Height (Extended) | 487.7 cm (192 in) | — |
| Reach At Load Height | 213.4 cm (84 in) | — |
| Reach At Load Height (Extended) | 335.3 cm (132 in) | — |
| Reach At Max Dump Height | 91.4 cm (36 in) | — |
| Dump Height | 274.3 cm (108 in) | 274.3 cm (108 in) |
| Dump Reach At Maximum Angle (Single Tilt) | 91.4 cm (36 in) | — |
| Reach From Swivel (Extended) | 792.5 cm (312 in) | — |
| Bucket Rotation | 169 ° | — |
| Stick Lift | 6141.6 kg (13540 lbs) | — |
| Loading Reach | 213.4 cm (84 in) | — |
| Lift Capacity At Full Height | 3968.9 kg (8750 lbs) | — |
| Operating Weight | 8890.4 kg (19600 lbs) | 8377.8 kg (18470 lbs) |
| Bucket Capacity | 1.1 m³ (1.44 cu yds) | 0.9 m³ (1.2 cu yds) |
| Bucket Width | 2926.1 cm (96 ft) | — |
| Bucket Breakout Force | 5266.2 kg (11610 lbs) | — |
| Reach From Swivel | 670.6 cm (264 in) | — |
| Height To Top Of Cab | 274.3 cm (108 in) | — |
| Overall Height | 426.7 cm (168 in) | — |
| Overall Length | 762.0 cm (300 in) | — |
| Overall Width | 243.8 cm (96 in) | 213.4 cm (84 in) |
| Wheelbase | 213.4 cm (84 in) | 213.4 cm (84 in) |
| Turning Radius | 579.1 cm (228 in) | — |
| Ground Clearance | 30.5 cm (12 in) | 30.5 cm (12 in) |
| Operating Voltage | — | 12 V |
| Service Brake Type | — | Wet Multi Discs |
| Actuation | — | Hydraulic with Power Assist |
| Pin Height (Shovel ) | — | 335.3 cm (132 in) |
| Dump Reach | — | 74.4 cm (29.3 in) |
| Lift To Full Height | — | 3397.4 kg (7490 lbs) |
| Shovel Breakout | — | 50067.5 kg (110380 lbs) |
Values come from the manufacturer-sourced model files; empty cells mean the property is not published for that model. No performance ranking is applied.