| Manufacturer | Zettelmeyer |
|---|---|
| Model | ZL1002Si |
| Type | Wheel Loader |
| Horsepower | 88 hp (65,6 kW) |
| Weight | 16760 lbs (7602,2 kg) |
| Tipping Capacity | 11680 lbs (5298,0 kg) |
| Max Speed | 20.6 mph (33,2 km/h) |
| Engine Model | KHD BF 4M 1013 E |
| Engine Type | Water-cooled |
| No Of Cylinders | 4 |
| Aspiration | Turbocharged |
| Displacement | 290.5 cu in. (4760,5 cc) |
| Alternator Supplied Amperage | 55 amps |
| Operating Voltage | 24 V |
| Rated Speed | 2100 RPM |
| Torque Speed | 1400 RPM |
| Net Power | 88 hp (65,6 kW) |
| Gross Power | 92 hp (68,6 kW) |
| Peak Torque | 289.2 lbs ft (392,1 N-m) |
| Fuel Capacity | 26.5 gal (100,3 l) |
| Engine Oil Capacity | 3.2 gal (12,1 l) |
| Hydraulic System Capacity | 29.1 gal (110,2 l) |
| Differential Front Capacity | 3.4 gal (12,9 l) |
| Differential Rear Capacity | 3.6 gal (13,6 l) |
| Transmission Type | Power shift |
| No of Forward Gears | 3 |
| No of Reverse Gears | 2 |
| Rear Axle Oscillation | 20° |
| Max Speed (Forward) | 20.6 mph (33,2 km/h) |
| Max Speed (Reverse) | 12.5 mph (20,1 km/h) |
| Pump type | Axial Piston Pump |
| Pump Flow | 28.1 GPM (106,4 LPM) |
| Relief Pressure | 3335.9 psi (230,0 bar) |
| Raise Lift Arms | 6 sec |
| Lower Lift Time | 5 sec |
| Bucket Dump Time | 1.5 sec |
| Operating Weight | 16760 lbs (7602,2 kg) |
| Tipping Load | 11680 lbs (5298,0 kg) |
| Bucket Capacity (Heaped) | 1.6 cu yds (1,2 m³) |
| Bucket Width | 84 in (213,4 cm) |
| Breakout Force | 14500 lbs (6577,1 kg) |
| Reach At Max Lift And Dump | 36 in (91,4 cm) |
| Dump Clearance At Max Raise | 108 in (274,3 cm) |
| Turning Radius | 192 in (487,7 cm) |
| Wheelbase | 96 in (243,8 cm) |
| Bucket Hinge Pin | 132 in (335,3 cm) |
| Cab Height | 108 in (274,3 cm) |
| Overall Length | 228 in (579,1 cm) |
| Ground Clearance | 24 in (61,0 cm) |
| Width Over Tires | 84 in (213,4 cm) |
| Tire Size | 15.5-25 |
Zettelmeyer ZL1002Si Specs (Weight, Lift Capacity, Hp, Dimensions)
Compare with Another Model
1
2
3
Another Models
